vSphere 6 Archives -

HCX Gotchas Vol 1

September 2, 2019 Bilal Ahmed 3

Right so I have been spending a lot of time working with and learning HCX recently. There are loads of people telling you how great it is and the funky things it can do (and it is great). BUT there are things that can trip you up when deploying it, and every-time I have come across one I have documented it, in the hope that I can help people who deploy it and configure it in the future! Deploying HCX Manager Now HCX is a bit of a resource hog, especially when you start deploying the additional appliances, so I was hoping to make full use of my Intel NUCs but that wasn’t meant to be. HCX Managers need 4x […]

Lets Talk About Sexigraf @Sexigraf_fr #Sexigraf #Monitoring #vExpert

October 9, 2017 Bilal Ahmed 0

So I went to my first VMUG recently and it was great! I met plenty of new people and learned a lot of new things. I got in a few discussions about monitoring and I mentioned that I was pretty fond of Sexigraf @Sexigraf_fr . I found it interesting that a few people had never heard of this great FREE product. I mean monitoring is important, whether you want to know what your cluster utilisation is or how your datastore latency is or how your VSAN cluster is doing. Keeping stats for a period of time is also important because you want to be able to monitor trends etc. There are plenty of products out there that can help you […]

WARNING: Veeam Backup VDDK error 1 and 2 ESXi 5.5/6 Veeam B&R v8/9 Updated: 03/01/2017

January 3, 2017 Bilal Ahmed 0

So this has been an ongoing saga for quite a while: Repeated VDDK error 1 and 2 This is an issue I blogged about a little while ago too, right here: WARNING: Veeam Backup VDDK error 1 and 2 ESXi 5.5/6 Veeam B&R v8/9 It has been causing people plenty of issues and although it’s simple to fix, it’s annoying and it shouldn’t be happening! Veeam and VMware have been pointing the finger at each other for months now. Personally I would lean to it being a VMware issue, simply because a restart of the management agents resolves the issue. So I have been following the thread on the Veeam forums and there has finally been an update! VMware have […]

The Host Virtual MAC Address Riddle

September 5, 2016 Bilal Ahmed 1

For ages I have been pondering over ‘something’ which seems very trivial and the fact I can’t get any solid info on it is driving me nuts: Why does every pNIC also have a virtual MAC address? So here with have the VMkernel ports, a VSS and pNICS: Just as you would expect, every physical NIC (pNIC) on a host has a MAC address. BUT when you type ‘esxcfg-info -n‘ in the shell, you will notice that every vmnic also has a Virtual MAC Address! \==+Physical Nic : |—-Name…………………………………………..vmnic3 |—-PCI Segment…………………………………….0 |—-PCI Bus………………………………………..2 |—-PCI Slot……………………………………….0 |—-PCI function……………………………………1 |—-MAC Address…………………………………….XX:XX:XX:32:06:1f |—-Virtual MAC Address……………………………..00:50:56:52:06:1f |—-FPT Shareable………………………………..true Now as you can see the Virtual MAC Address starts off with a VMware MAC and then finishes at the […]

Journey to VCIX-NV – Part 2 – Deploying and Editing NSX Controllers Settings

July 26, 2016 Shady ElMalatawey 0

The next components to deploy are the NSX Controllers. These are the main components of the NSX Platform Control Plane. NSX Controllers can be deployed as a single instance (not recommended for production) or in a cluster of three nodes. They’re deployed by the NSX Manager itself, with just few clicks in the NSX Manager GUI. For lab environments, you can deploy just a single instance of the NSX Controller and you will be fine. If you want to deploy three of them, you might hit a problem with resource contention, because it requires 4 vCPUs, 4 GB of RAM and 2 GB RAM Reservation by default and you can’t edit the VM Settings. I found a blog post of Tom Fojta about downsizing NSX Controllers (In […]

Bootstrap a Single-node VSAN Cluster under Running vCenter Server

July 23, 2016 Shady ElMalatawey 0

In my NSX Lab, I needed a single-node cluster with VSAN enabled beside another normal cluster with three nodes. William Lam has a genius post about how to bootstrap a single-node VSAN cluster to add your vCenter on it in your lab, but unfortunately even though his advice works perfectly when you have a single ESXi host, it does not work well when you already have a vCenter in place. My story begins from the VSAN Default Storage Policy. This policy enforces that a deployment of VMs needs to have: Failures to Tolerate set to 1 (FTT =1 ): That means that the minimum number of nodes has to be 3 nodes and each VM disk has to be configured in RAID-1. Number of disk stripes=1: […]

VCAP6-DCV Deployment Beta

July 18, 2016 Bilal Ahmed 0

So myself and Kim did this exam the other day. Kim hasn’t done any DCA style exam before, and he had a similar experience to me on my first go. It kind of hits you like a train and its a lot to take in initially. The beta signup period didn’t give anyone much time to actually prep for it properly. Having done the 5.5 DCA, I remember looking at some of the questions and wondering what they were wanting……exactly. I did what I thought was correct, you don’t have time to second guess yourself, you just get on with it and do what you can. The best explanation for the DCA/Deployment exam is: Imagine you are a contractor and […]

VMAX3 with Solutions Enabler and vSphere SRM 6.0 Configuration Guide

June 5, 2016 Shady ElMalatawey 0

Last weekend, I was engaged by one of our biggest clients, a bank, to upgrade its virtual infrastructure to vSphere 6 and to migrate their infrastructure to new VMAX 3 storage arrays in both main and DR site. It’s one of only two customers in Egypt that uses vSphere SRM with VMAX Arrays for DR purposes. VMAX3 Arrays are enterprise-level arrays from EMC. They’re the descendant of the great Symmetrix Arrays and they use their own replication engine, Symmetrix Remote Data Facility (SRDF). To manage SRDF and integrate it with any other solution for DR Automation and Management, it requires a software component called Solutions Enabler (SE). This software consists of a client and a server component. SE server is either installed on a […]