ESXi PSOD #Homelab #vExpert #ESXi

February 18, 2019 Bilal Ahmed 0

So I booted up my HP Z600, this houses my main management VMs and ESXi runs off a usb stick. So nothing fancy. On boot up I got this lovely screen of joy: I don’t like PSODs they make me sad. Looking at the error and the fact that it was happening at boot up made me think of some USB drive issue. Let’s think about it for a minute, when ESXi is loaded off a USB/SD card it will then run in memory, and if you make a change it will save it to the drive or it will save automatically every hour (KB ). One thing you have to remember is to make sure you configure the advance […]

Setting up a HP StorageWorks P2000 G3 and a EMC CX4-120

May 6, 2016 Bilal Ahmed 0

So we decided to re-provision some old storage kit we had lying around. We found that we had an old StorageWorks P2000 G3 and a EMC CX4-120. We decided to attach them to a HP DL380 G6 we had spare, and fit that server with 2x8Gb HBAs and 2xSAS cards. The HBAs to attach to the EMC and the SAS cards to attach to the HP. So I installed 2012 on the physical box, got it all up and running. I noticed an issue with the SAS cards that on boot sometimes they wouldn't initialize and they would have the yellow exclamation mark next to them in the Windows device manager, and I found that by just disabling and re-enabling […]